Metal Roofing System

Introduction

Uniccare Mettal Tec provides high quality Pre-painted Galvanized, Pre-painted Galvalume and Bare alvalume Trapezoidal Profile Sheets using latest Technology which has long term durability, spectrum of colours, special metallic coating, and aesthetic beauty, to enhance the appearance, lift and value of the building. The profiled sheets are supplied in customized sizes.

Coated Steel Sheet

Coated steel sheet has been used extensively by the construction industry throughout the world for nearly two centuries. Because of its excellent corrosion resistance, it has become the preferred material for a wide range of construction USBS, particularly roofing and walling. Coated steel sheet is unique as a building material. It combines the strength of steel with the excellent corrosion protection of zinc/aluminium alloy coatings. It can be punched, roll-formed and joined into a limitless number of structural and decorative building products.

Features:

• Excellent design & secure fastening systems ensure the security and weather-light performance of coated steel roofing during extreme weather. • Coated steel sheets are resistant to fire. • Excellent thermal properties that keep the building cooler in summer and warmer in winter • Prevents noise and provide quite roofing system, particularly when used in combination with appropriate insulation systems.

Pre - painted Galvanized Steel

Thickness (TCT) : 0.30 mm - 0.80 mm
Metallic Coating : Z 120 (Total on both sides) Higher or lower coating optional
Tensile strength : 340 - 550 Mpa
Paint coating : RMP / SMP / PVDF
Paint Thickness : 18 - 22 micorn on Top & 5 - 8 micron primer on bottom
Thickness Tolerance: As per ISI
Standard Followed :IS 277, ASTM A653 AS 1397 JISG3312

Pre - Painted Galvalume / Bare Galvalume Steel

Thickness (TCT) : 0.30 mm - 0.80 mm
Metallic Coating : Zinc-Aluminium Alloy Coating AZ150 Higher or Lower Coating Optional.
Tensile strength : 550 Mpa
Paint coating : RMP / SMP / PVDF
Paint Thickness : 18 - 22 micorn on Top & 5 - 8 micron primer on bottom
Thickness Tolerance: As per ISI
Standard Followed: IS 277, ASTM 1397 / A755 / A792, JISG3321 / 3322
Combination : 55%AL, 43.4%Zn & 1.5 – 1.6% Si

Types of Trapezoidal Profile:

Types of Trapezoidal Profile:

Types of Trapezoidal Profile: